Hi,
This problem is occurring every time i run the script specially in IE.
Even though the object is visible and it is highlighted, the doesn't work the same script works perfectly fine with Firefox.
Search found 24 matches
- Thu Oct 25, 2012 5:22 am
- Forum: Object Identification and Technologies
- Topic: Script fail to identifiy the object even when fully loaded
- Replies: 7
- Views: 2174
- Wed Oct 24, 2012 3:16 pm
- Forum: Object Identification and Technologies
- Topic: Script fail to identifiy the object even when fully loaded
- Replies: 7
- Views: 2174
Re: Script fail to identifiy the object even when fully loaded
Hi, I am using IE 8 and this problem is occurring even in Firefox. I don't think this has anything to do with browser. Because the objects are being identified when i highlight from Repository and the screenshot captured on failure by the tool shows that object. This problem is affecting me very bad...
- Mon Oct 15, 2012 11:05 am
- Forum: Object Identification and Technologies
- Topic: Script fail to identifiy the object even when fully loaded
- Replies: 7
- Views: 2174
Re: Script fail to identifiy the object even when fully loaded
HI,
Please find the attached snapshot.
Sorry, I will not be able to provide access to the application it's a not available in internet.
Please find the attached snapshot.
Sorry, I will not be able to provide access to the application it's a not available in internet.
- Mon Oct 15, 2012 10:59 am
- Forum: Automation Tools
- Topic: Can we assign variable to a value from the output of another
- Replies: 4
- Views: 2905
Re: Can we assign variable to a value from the output of another
Thanks IanF for your response,
but the solution i am looking is bit different. I wanted pass the values between different recording modules.
Support: Can you provide some solution? Or Is there a way update the values in Global variables?
but the solution i am looking is bit different. I wanted pass the values between different recording modules.
Support: Can you provide some solution? Or Is there a way update the values in Global variables?
- Sat Oct 13, 2012 11:29 am
- Forum: Object Identification and Technologies
- Topic: Script fail to identifiy the object even when fully loaded
- Replies: 7
- Views: 2174
Re: Script fail to identifiy the object even when fully loaded
Hi, Again this problem occurred, one of the object property had changed so updated it to Regular expression. Initial Object was identified with ID value "ctl00_pageBody_tabContainer_tabForm_requestFields_ ctl04 _field403']" Next time when i ran the script the object property had changed to "ctl00_pa...
- Sat Oct 13, 2012 9:37 am
- Forum: Object Identification and Technologies
- Topic: Script fail to identifiy the object even when fully loaded
- Replies: 7
- Views: 2174
Script fail to identifiy the object even when fully loaded
Hi, I am using Ranorex for cross browser testing, i am mostly using Record and playback for this. Script is always fails to identify few objects. I have tried the below things: 1) Run complete flow (Normal Scenario) : Script Failed 2) When i highlighted the element from Repository, it was able to id...
- Thu Sep 20, 2012 4:02 pm
- Forum: Automation Tools
- Topic: Can we assign variable to a value from the output of another
- Replies: 4
- Views: 2905
Can we assign variable to a value from the output of another
Hi, I have recorded 4 scenarios: 1) Create a Request 2) Admin Rejects Request 3) The same request (Created in 1) is re-submitted after some actions 4) Admin Approves the request I want to use the request which is created in Recording module 1 in all other recording modules so that i can run all in a...
- Sat Sep 01, 2012 5:20 am
- Forum: Object Identification and Technologies
- Topic: Object properties changes
- Replies: 3
- Views: 2154
Re: Object properties changes
Hi, Yes, i have been working with adding objects from dom... I had three queries in my post :) But the problem is i can add objects from IE only from DOM not from browser..is this a defect or i am missing something here? The problem with working with DOM objects is in the AUT that the unique id whic...
- Wed Aug 29, 2012 12:55 pm
- Forum: Object Identification and Technologies
- Topic: Object properties changes
- Replies: 3
- Views: 2154
Object properties changes
Hi, I am using working on 3.3.01 for automating SharePoint info paths. The application is undergoing changes and each element is identified with an unique id which changes if any object is added or removed from the form. This problem is when i am working by adding the objects using DOM. But when i t...
- Wed Aug 29, 2012 12:26 pm
- Forum: Object Identification and Technologies
- Topic: People Picker with Ranorex
- Replies: 7
- Views: 2181
Re: People Picker with Ranorex
Please find the attached snapshot.
- Fri Aug 17, 2012 5:16 am
- Forum: Object Identification and Technologies
- Topic: People Picker with Ranorex
- Replies: 7
- Views: 2181
Re: People Picker with Ranorex
Hi, I am using the Ranorex version 3.3.0 which is validated form Client and i need to work only on the validated version :( Regarding adding objects, you have suggested to add with the default (Host as root). I have only been working with Ranorex since a month or so, but i feel adding objects with A...
- Wed Aug 15, 2012 2:06 pm
- Forum: General Questions
- Topic: Exporting Ranorex results
- Replies: 7
- Views: 4165
Re: Exporting Ranorex results
Thanks Bernhard, it works now
Instead of adding the above code in every script. Can i put this on Program.cs or any place where this will be executed every time i run a script?
Thanks & Regards,
Kumar
Code: Select all
Ranorex.Core.Reporting.TestReport.ThumbImageWidth = 300;
Thanks & Regards,
Kumar
- Wed Aug 15, 2012 10:50 am
- Forum: Automation Tools
- Topic: Perform Click or select operation without mouse movement
- Replies: 3
- Views: 3733
Re: Perform Click or select operation without mouse movement
Thanks for your reply Pawet!!!
After trying different options the below options worked well:
For Text: Focus
For Button : Press
For Link : Open
"EnsureVisible" is suppose to make the object visible for any kind of object but unfortunately it never worked for me
After trying different options the below options worked well:
For Text: Focus
For Button : Press
For Link : Open
"EnsureVisible" is suppose to make the object visible for any kind of object but unfortunately it never worked for me
- Wed Aug 15, 2012 7:13 am
- Forum: Object Identification and Technologies
- Topic: People Picker with Ranorex
- Replies: 7
- Views: 2181
Re: People Picker with Ranorex
Hi Markus,
Please find the attachment of the snapshot as described in the link provided.
I have attached 2 snapshots
1) By spying with the default in the Root(Host)
2) With application set as Root.
Thanks,
Kumar
Please find the attachment of the snapshot as described in the link provided.
I have attached 2 snapshots
1) By spying with the default in the Root(Host)
2) With application set as Root.
Thanks,
Kumar
- Mon Aug 13, 2012 8:42 am
- Forum: Automation Tools
- Topic: Perform Click or select operation without mouse movement
- Replies: 3
- Views: 3733
Perform Click or select operation without mouse movement
Hi, I have been working with some SharePoint info-paths. Is there a way that with out mouse movement all the operation can be executed? I went through the forum and FAQ solutions are specific to a particular type of object (Link or List). Can anyone please share a general approach/method which can b...